by Lyn Beinat | Nov 1, 2019 | Draught Stopper, ecoMaster Home, Energy Efficiency, Thermal Efficiency
Ensuite/Bathroom Improvements There is a longish story of evolution in our ensuite (bathroom). There’s a little bit of an echo in here because there is no external opening to this room. You can see behind me that we can see straight out the back, but that’s because...
by Lyn Beinat | Nov 1, 2019 | Draught Stopper, ecoMaster Home, Energy Efficiency, Thermal Efficiency, Utility Bills
Draught Proofed Cavity Sliding Door As is usually the case with master bedrooms, there’s often a walk-in robe. In this case, we’ve got a cavity sliding door that slides into an external wall, so almost always causes a draught issue. In this case, we fitted the Draught...
by Lyn Beinat | Nov 1, 2019 | Draught Stopper, ecoMaster Home, Energy Efficiency, Windows
Improved Air Circulation I’m standing at the east end of the home. One of the things that we did was to improve the cross-flow ventilation (air circulation) of the home. There used to be a regular awning window, which is really poor for ventilation purposes. We took...
by Lyn Beinat | Oct 31, 2019 | Draught Stopper, ecoMaster Home, Energy Efficiency, Thermal Efficiency, Utility Bills
Sealing Up Heating Outlets About a year after we stopped using the central heating system, we decided to have a go at blocking up the outlets.What you see here, is a typical ceiling outlet of a heating system. You might see a silvery part inside, or if I open...
by Lyn Beinat | Oct 29, 2019 | Double Glazing, Draught Stopper, ecoMaster Home, Energy Efficiency, Secondary Glazing, Thermal Efficiency
DIY Projects in the Study Working in a study can be a reasonably uncomfortable experience. For a start, you’re just sitting sedentary. If space is cool, you’re soon going to be feeling frozen. There are a few things that have been done here to try and alleviate that....
by Lyn Beinat | Oct 29, 2019 | Draught Stopper, ecoMaster Home, Energy Efficiency, Thermal Efficiency
Lighting Upgrade in the Kitchen One of the things that we did really early on was dealing with the lighting. We had about 40 of these halogens downlights fitted in a gimbaled fitting (that is they had the ability to tilt). But they were all 100% flat on the ceiling,...
Recent Comments